The PB-3 combines boutique handmade quality with unmatched versatility by incorporating tapped singlecoils & a mini toggle switch into the classic Precision Bass® blueprint.
The PB-3 has been designed from the ground up to offer 3 different DC resistance outputs at the flick of a switch - with each setting producing a unique voice. Both coils of the PB-3 have 3 live wires (instead of just 1), with each acting as a terminal for a different number of rotations of copper wire. This means that there is a choice of a short, medium or long coil offering DC resistance outputs of approx 6.60kΩ*, 10.00kΩ* and 13.40kΩ* respectively. Each setting can be accessed via a 3-way toggle switch conveniently located between the tone control and output jack.
The characteristics of each setting are as follows:
Low setting (switch in left position) - mellow and delicate with sparkling highs not usually associated with a Presicion bass® pickup.
Middle setting (switch in right position) - this is the typical resistance value for this type of pickup- classic Presicion bass® growl with a warm, round tone.
High setting (switch in centre position) - considerably more low-end and mids. Very punchy with a noticeable increase in volume.
Despite its innovative design, the PB-3 features vintage-inspired Elektrisola 42 awg heavy formvar copper wire and alnico 5 magnets to ensure that each setting provides warmth, clarity and rich dynamics reminiscent of the golden era of electric bass guitars.
Learn more about North Star tapped singlecoils here.
The PB-3 comes as a prewired scratchplate. Just connect your existing earth wire (usually connected to the underside of bridge for grounding) and enjoy supeior tone and unrivalled versitility.
North Star PB-3
Low setting: 6.60kΩ *
Middle setting:10.00kΩ*
High setting:13.40kΩ** DC resistance values should be taken as a guide as this reading will change depending on temperature. Different multi-meters will also produce slightly different readings.